SPH19S is the piezoresistive pressure sensor with isolated construction and precise compensation. It uses high stable monosilicon sensor die. Stainless steel 316L housing with diameter Ф19mm. Wider temperature compensation and zero correction are calibrated by laser trimming technics. The measured
pressure is transmitted onto silicon die through 316L diaphragm and inner sealed silicon oil, to transform the pressure to electric signal.The sensor die doesn't contact the measuring medium directly, which forms to isolated structure, suitable for various liquid medium.
High stability monosilicon sensor die
Voltage excitation
Isolated structure, suitable various fliud
All in 316L stainless steel
Hastelloy C, Tantalum diaphragm material optional
φ19mm diameter
Pressure range: 0~40 kPa...60MPa
Power supply: 5-12VDC
Electrical connection:φ0.5mm kovar pin or 100mm silicone rubber soft wire
Common mode voltage output:50% of input(typical)
Bridge resistance: 6kΩ
Respond time(10%-90% ): < 1ms
Insulation resistance: 500MΩ/500VDC
Industrial process control
Gas, liquid pressure measure
Liquid pressure system and switch
Refrigeration equipment and air conditioner
Aviation and navigation inspection
© LEEG All Rights Reserved
If you have any questions, please send an e-mail inquiry